
Diamond Tooling
Metal-bond segments, hybrids, resin polishing pads and cup wheels — matched to your machine, your slab and your finish. Fresh tooling on every job.
Browse in the catalog →Coatings, polishing and staining supply, the equipment to install it, and a shop that keeps it running — three businesses that used to mean three stops, now under one roof on I-35.

Full systems, not single products — moisture mitigation, primers, body coats, topcoats, flakes, quartz and metallics, plus the diamonds and densifiers to polish it out. Shop staff who have run the material, not just stocked it.
Explore systemsRental fleet with delivery along the corridor (when available): planetary grinders, edge machines, scrubbers, sweepers and HEPA dust extraction, serviced in-house and ready to work when they land on site.
A working repair shop for grinders, scrubbers, burnishers and dust control — diagnostics, parts and service from techs who run the same machines in our own rental fleet. Anyone can bring work to us.
Start here for products. Build your order on this page — catalog sundries below, rental machines from the Fleet Finder — and it all rides in one order. The actual store is our online store: secure checkout lives there. Orders ship from San Marcos (UPS), land on the same truck as your rental when delivery is available, or wait at the shop for pickup.

Metal-bond segments, hybrids, resin polishing pads and cup wheels — matched to your machine, your slab and your finish. Fresh tooling on every job.
Browse in the catalog →
Full-broadcast vinyl flake in the blends crews ask for by name — Domino, Creekbed, Gravel, Shoreline, Tidal Wave, Cabin Fever — in 1/4″ and 1/8″, plus quartz and metallic options.
Browse in the catalog →
Standard, fast-cure and low-temperature epoxies, moisture-barrier (MB) builds and cove systems — the base and body of the stacks in the Systems Explorer.
Browse in the catalog →
ProSpartic polyaspartic topcoats, ProThane urethanes, densifiers, concrete stains and dyes, and guards — everything over the slab, in one order.
Browse in the catalog →
HEPA filters and prefilters, vacuum bags, hoses, squeegees, rollers and wear parts for the machines we rent and repair — the stuff that keeps a crew day from dying.
Browse in the catalog →The full catalog is live in the store — 3,799 products loaded and synced with our San Marcos inventory: moisture-test kits, squeegees and gauge rakes, tape, PPE, job supplies and coatings kits, with coatings shipping under ground-shipping rules. All product orders can be delivered or drop-shipped — pickup at the shop is an option, not a requirement.
Open the StoreHow online ordering works: the online store holds the catalog, the cart and secure checkout. The San Marcos shop fulfills it — shipped by UPS, delivered with a rental when delivery is available, or ready at the shop at 1660 S IH-35. Returns need prior approval — call (844) 776-7390 before sending anything back.
Everything under Chemicals that is not a machine — coatings sundries, tooling, flake, parts and job supplies. Search it, filter it, download it, and click any item to add it to your order. All product orders can be delivered or drop-shipped — you don't have to pick up at the shop. Rental machines join the same order from the Fleet Finder below — one list, products and machines together. Send the order to the shop and we confirm pricing, availability and delivery, or check the products out in the store.
No catalog items match that search. Call (844) 776-7390 — the shop can check the shelf.
This section is the quick-order view of the catalog — the complete 89-page Argenbright One catalogue is available as a PDF above, and the same range is live in the online store. Machines and Classic Coatings are call-for-pricing and are never sold online.
One company, two divisions — Chems for coatings, polishing & staining supply, and Rentals / Machines for equipment rental and repair. Buy the system, rent the machines, and get both serviced in the same building.

Pro-grade resin systems and everything that goes under and over them, stocked in San Marcos.

Rentals delivered anywhere along the corridor (when available) — the machine shows up serviced, fueled and job-ready.

Your equipment, our benches. If it grinds, scrubs, sweeps or sucks dust, we can put it back to work.
Search the rental fleet or filter by the work. Pick a machine here and, when delivery is available, we bring it to your job site anywhere along the corridor — and we service all of Texas.
No machines match that search. Call (844) 776-7390 — if it belongs on a concrete floor, odds are we can get it.
How rentals work: hit Reserve on any machine and it joins your order — pick your start date, term and job site in the order panel, send it in, and the machine is delivered to your job site anywhere along the corridor (When Available). No trailer needed on your end. Prefer to talk it through? Call (844) 776-7390.
In the fleet: Lavina · CPS · Forte · Kärcher — every machine serviced in our own shop before it goes out.
Start with the floor you are standing on. Pick a job type and see the stack we would put under your feet — then price the whole system, not just the topcoat.

The three-day garage floor that outlasts the house paint. Ground, patched, and built for hot tires and Texas heat.

Built for forklifts, pallet jacks and 24/7 traffic. Chemistry chosen for abrasion and chemical resistance, not looks.

Seamless, cove-based and wash-down tough — the stack that passes inspection and survives the sanitation crew.

No coating to peel, ever. The slab itself becomes the finish — ground, dyed if you like, and polished to a mirror.
A dead machine is costing you a crew day. The handoff takes two minutes — tell us what it is and what it is doing, and we will have an estimate started before you drop it off.

Pick the type below — it pre-fills the contact form. Add the brand and what it is (or is not) doing.
1660 S IH-35 in San Marcos, Mon–Fri 8–5. Anyone can bring work to us — no rental account required.
You get a written estimate first. Nothing gets fixed — or billed — until you say go.
What are we fixing?
Our home yard is in San Marcos on I-35 — we deliver along the corridor and service all of Texas. Tap a stop to see what we do there.
Delivery along the corridor (when available). We bring it, place it, and pick it up.
Geography does not apply — if you can get the machine to San Marcos, the shop will take it in.
Shop pickup in San Marcos, delivery with rentals along the corridor (when available), and shipped orders anywhere beyond.
One company, built in San Marcos, so a flooring crew never has to make three stops again.

Argenbright One LLC was formed in San Marcos, Texas in November 2026 — bringing coatings supply and equipment rental & repair together under one roof at 1660 S IH-35, and one name: One Source. Every Solution.
The idea is simple. A floor job needs material, machines and a shop that keeps both running. Running those as separate stops costs crews days. So Argenbright One runs them as two divisions of one company:
Same building, same crew, one phone number — (844) 776-7390. If it goes on a concrete floor, under it, or keeps the machine running, it starts here.
The questions we hear every week. Anything else — one call sorts it: (844) 776-7390, Mon–Fri 8–5, Saturday by appointment.
You reserve right here — add the machine to your order, pick your start date, term and job site — or by phone. We match the machine and tooling to the job, and it shows up staged and ready to work at your job site anywhere along the corridor, when delivery is available. No trailer needed on your end.
Tell us the slab condition, the coating, the square footage and the power on site. We will recommend the machine and dust-control setup that fits the work — that is the point of reserving with a person, not a cart.
No — diamond tooling is a consumable, so we sell it, never rent it. It gets matched to your grinder, slab and finish, and you start every job with fresh segments instead of whatever the last crew left on them. Order it in the online shop or add it to your reservation.
Yes. The Argenbright One online store carries tooling, flake, parts and job supplies with secure checkout — shipped from San Marcos, delivered with a rental, or held at the shop for pickup.
Call us right away. We will help troubleshoot and coordinate the quickest practical path to getting your crew moving again — our own repair shop backs every machine in the fleet.
Yes — a day for a small prep, a month for a phased commercial job. Send your dates through the contact form or by phone and we will confirm the right term and current availability.
Yes. The Argenbright One shop services major equipment brands with diagnostics, written estimates, repairs and preventive maintenance. Anyone can drop off at 1660 S IH-35, Mon–Fri 8–5 — no rental account required, and nothing gets fixed or billed until you approve the estimate.
One form for everything — material pricing, a machine reservation, or a repair handoff. It goes to the same crew either way.
Your request is written up. Send it to the shop by email, or call it in — either way it lands with the same crew.